MV210 Dual 10-inch Built-in 2-Way Line Array Full-Range Speaker
The MV series is a three-way two-driver linear array. MV210 is a 3-way passive design containing one 10-inch low-frequency driver, one horn-loaded 8-inch mid-frequency driver and two 2.5-inch exit high-frequency compression drivers. With 2.5-inch voice coils mounted on dedicated wave-forming devices, the structure and acoustic design allow flying vertical arrays of up to 24 speakers. MVSUB is a high-performance subwoofer designed for ground stacking applications, equipped with two 18-inch long-throw drivers built into a band-pass horn cabinet design. With high sound pressure level and extended frequency response, MB218 features a cardioid single 18-inch + single 12-inch subwoofer with one 18-inch subwoofer driver and one 12-inch subwoofer driver.
- characteristics
- parameters
- download
System type: built-in 3-way
Woofer: 2 x 10-inch(65mm voice coil)neodymium unit;
Midrange driver: 1x8-inch(65mm voice coil)neodymium unit;
Tweeter: 2x2.5-inch(1.4-inchthroat)compression driver(65mm voice coil)neodymium unit;
Frequency response: 67Hz~18kHz(±3dB)/64Hz~20kHz (-10dB);
Sensitivity (1W/1m): 99dB;
Nominal impedance: 8 ohm;
Rated power (AES): 900W (peak 3600W);
Coverage angle (HxV): 80° x 0 - 7° (adjustable step 1 degree)
SPL (continuous/peak): 133/139dB;
Connectors: 2x NL4 sockets (IN: 1+1-);
Dimensions (H x W x D): 310x700x460(mm);
Weight: 34 kg.
Woofer: 2 x 10-inch(65mm voice coil)neodymium unit;
Midrange driver: 1x8-inch(65mm voice coil)neodymium unit;
Tweeter: 2x2.5-inch(1.4-inchthroat)compression driver(65mm voice coil)neodymium unit;
Frequency response: 67Hz~18kHz(±3dB)/64Hz~20kHz (-10dB);
Sensitivity (1W/1m): 99dB;
Nominal impedance: 8 ohm;
Rated power (AES): 900W (peak 3600W);
Coverage angle (HxV): 80° x 0 - 7° (adjustable step 1 degree)
SPL (continuous/peak): 133/139dB;
Connectors: 2x NL4 sockets (IN: 1+1-);
Dimensions (H x W x D): 310x700x460(mm);
Weight: 34 kg.
